Cart $0.00
0
0
Subtotal: $0.00

No products in the cart.

No products in the cart.

ResQslide Board & Chair Strap Kit

$454.95

The ResQslide Board & Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme (both sold separately) which can slide down stairs.

If a Patient is in an armchair, electric or manual wheelchair and they need to be taken out of the chair in an emergency, this could be a very difficult and possibly dangerous task for the Patient and the Carers. The emergency maybe be due to a fire. In which case the lifts in the building cannot be used to evacuate. The only means of escape would be to use the stairs. Another emergency could be if a Patient is having a fit or seizure and they may need CPR.

The ResQslide Board is extremely strong and will bend when in use but not break. The outer surface may mark easily and a new board may look second hand when new. The advantages of using this material outweigh the disadvantages.

Sometimes in an emergency there may not be enough time to use the Chair Strap, so we suggest staff try to use the ResQslide Board without the Chair Strap. The Chair Strap is designed to help keep the ResQslide Board in position and allow the Carers to pay more attention to sliding the Patient .

Note: As this is considered an over-sized item, customers from outside of Australia should contact us before placing an order so that we can provide an accurate shipping cost.

To Use

Simply lasso the two Female buckles through the front hand slots. These can be left in position when the Board is not in use, to save time in an emergency. It is possible to put a stitch in the lasso so they are not easily removed. We suggest one of the Male buckles is attached to a Female buckle, so the long Chair Strap is not lost in storage.

When using the ResQslide Board & Chair Strap Kit, slide the Board under the Patient ‘s bottom. Then the Chair Strap can be placed around the back of the chair and buckled together. Adjust to size to take up any excess webbing behind the chair. Positioning the Strap behind the chair will depend on the design and size of the chair.

After the Patient has slid down from the chair and they are in position on the evacuation device, remember to undo the Chair Strap before removing the ResQslide Board from under the Patient.

The Chair Strap has been made very long for large armchairs. When using on a small wheelchair there will be a lot of spare webbing to adjust to size. We suggest trying out different ways of fitting to different chairs, so staff will be trained before an emergency. The procedure should be recorded, possibly with photos and kept with the ResQslide Board.

Also available in the Pelican Slide Board range:

Slide Board - Aero Transfer Slide Board – Aero Transfer
Slide Board - Stubby Slide Board – Stubby
Slide Board - Boomerang Slide Board – Boomerang
Slide Board - Wheelchair Cut Out Slide Board – Wheelchair Cut Out
Car Emergency Slide Board Kit Car Emergency Slide Board Kit

 

The full range of ResQproduct options are listed below. Click here to view the Features List for the range of Pelican evacuation devices.

 

ResQsheet Stored under the Patient’s mattress on the bed and is ready to use, with the Patient then evacuated with their mattress. Slides well on most vinyl floors.
ResQsheet for Vinyl & Carpet Same as the ResQsheet above, but with a built-in white plastic slide board underneath. Slides well on all floor surfaces including Vinyl & Carpet.
ResQsheet for Vinyl & Carpet – King Single A special version of our ResQsheet for Vinyl & Carpet, made to fit king single size beds, and can also be used with pressure care air-flow mattresses.
ResQme ResQme This is kept in storage and taken to a Patient who needs to be evacuated. A budget option evacuation device.
ResQpod ResQpod Same as the ResQme above, but with more Cross Straps to contain the Patient.
ResQmat ResQmat Same as the ResQme and ResQpod above, but with a built-in mini-mattress for comfort, and the side material can enclose the Patient.
ResQslide Board & Chair Strap Kit ResQslide Board & Chair Strap Kit The ResQslide Board & Chair Strap Kit is used to slide someone from a wheelchair to an evacuation device on the floor, such as the ResQmat, ResQpod or ResQme which can slide down stairs.

Weight 6 kg
SKU 220PSBK Category
Shopping Cart
ResQslide Board & Chair Strap Kit
$454.95